2021 High quality Square Aluminum Rod - Best Quality A1050 99.50% Pure Aluminium Non-alloy Busbar – Huifeng

Pure aluminum has low strength, but has good plasticity, weldability and corrosion resistance.
Used for reflectors, lighting fixtures, ornaments, chemical industrial tanks, challenging materials, etc.
Aluminium busbars are often used as electrical conductors in power distribution systems, where heat can easily be dissipated.
A busbar may either be supported on insulators, or else insulation may completely surround it.
Busbars are protected from accidental contact either by a metal earthed enclosure or by elevation out of normal reach.
· Materials: A1050p
· Shape: Round(Full Round) Square(Round Corner)
· Mold : 3t to 30t.
· Usage: Power Company, Ereflectors, lighting fixtures, ornaments, chemical industrial tanks, challenging materials, etc.

Copper clad aluminum bus bar is also called copper clad aluminum bus bar, copper clad aluminum bus bar or copper-aluminum composite bus bar, etc. Its English name is Copper clad aluminium bus-bars (CCA). Copper-clad aluminum busbar is a high-tech energy-saving conductor material, which has the characteristics of copper’s conductivity and aluminum’s low density. As early as the 1960s, some European and American countries began to research and apply copper-clad aluminum materials, and were the first to formulate conductor standards. Copper-clad aluminum is known as the third-generation new conductor after copper and aluminum in Europe and the United States. There are relevant industry standards in various countries. It has entered the practical stage and is widely used in automation, metallurgy, high and low voltage electrical appliances, construction and metallurgical industries, etc.

Advantages of aluminum cladding

1. Good conductivity: The electrical performance of copper-clad aluminum row with 15% or 20% copper-to-aluminum volume ratio is 85% of that of pure copper compared with copper row.
2. Light weight: The density of copper clad aluminum bars is only 37%-40% of pure copper bars, and the length (volume) of the same weight is 2 to 2.5 times that of pure copper bars.
3. Good mechanical properties: good tensile strength, flexibility and elongation.
4. Firm copper-aluminum bond: permanent atomic intercrystalline bond between two different metal materials at various ambient temperatures, and the copper layer (tin plating, zinc layer) is evenly distributed without any physical defects.
5. Good ductility and reliability: After a special heat treatment process, it has a certain degree of plasticity, which is conducive to punching, shearing, and bending processing products without cracking and separation. In order to improve the corrosion resistance, tin plating and zinc plating can be performed on the surface of the copper layer.
6. The best choice: save copper, greatly reduce production costs, green and environmentally friendly, without any pollution.
Note: Copper-clad aluminum bars of various widths and thicknesses can be processed according to users.

Copper-clad aluminum busbars can be specially used to replace copper busbars and aluminum busbars. widely used in. Automation, metallurgy, high and low voltage electrical appliances, construction industry and metallurgical industry. The product adopts foreign advanced bimetal composite material technology, with stable quality and reliable performance. It is a high-tech energy-saving product.

Copper clad aluminum row parameters

Length: 3~6m
Density: between 3.63 g/cm3～3.96g/cm3
Tensile strength: annealed state 100-138MPA
Elongation: 15% in soft state; 1.5% in hard state
Copper weight ratio: 40%
Volume ratio of copper content: 15%~20%, relative conductivity: 65%
Same mass length ratio: 2.377

Current current reference data:

Application field

Bus ducts, switch cabinets, control cabinets, transformers, safety switches, vacuum switches, relay systems, motor control centers, track power supply systems, electrode correction coils, reactors and other windings, railway traction equipment, high, medium and low voltage distribution cabinets, generator sets And substations, various copper-aluminum transition joints, high and low voltage distribution cabinet conductive bars, high and low voltage bus bars, bus bars, contact slip wires

“Jinan Huifeng aluminium Co., LTD”,provide full range services of aluminum tube including: extrusion, anodizing, machining and PVDF painting .have a wide range of commercial alloys, 2A12, 2014, 2014A, 2017A, 2024, 3003, 5A02, 5083, 6005A, 6060, 6061, 6063, 6082, 6463, 7020, 7075 etc .Temper H111 O T3 T351 T42 T5 T6 T651

Aluminum tube is a kind of non-ferrous metal tube, which refers to a metal tubular material that is made of pure aluminum or aluminum alloy by extrusion processing to be hollow along its full length in the longitudinal direction.

It is widely used in industries such as automobiles, ships, aerospace, aviation, electrical appliances, agriculture, electromechanical and household appliances.

Classification of aluminum tube/pipe

Aluminum tubes are mainly divided into the following types:

Divided by shape: square tube, round tube, pattern tube, special-shaped tube, global aluminum tube.

According to the extrusion method: seamless aluminum tube and ordinary extruded tube

According to the precision: ordinary aluminum tubes and precision aluminum tubes, of which precision aluminum tubes generally need to be reprocessed after extrusion, such as cold drawing, fine drawing, and rolling.

According to thickness: ordinary aluminum tube and thin-walled aluminum tube

Performance: corrosion resistance, light weight.

Aluminum tube advantages: First, welding technology advantages: the welding technology of thin-walled copper-aluminum tubes suitable for industrialized production is known as a world-class problem and is a key technology for replacing copper with aluminum for connecting pipes for air conditioners.

The second is the service life advantage: from the perspective of the inner wall of the aluminum tube, since the refrigerant does not contain moisture, the inner wall of the copper-aluminum connecting tube will not corrode.

The third is the energy-saving advantage: the lower the heat transfer efficiency of the connecting pipe between the indoor unit and the outdoor unit of the air conditioner, the more energy-saving, or in other words, the better the heat insulation effect, the more energy-saving.

Fourth, excellent bending performance, easy to install and move

Surface treatment

Chemical treatment: oxidation, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer

Anodized Yucheng carved round tube

Anodized Yucheng carved round tube

Mechanical treatment: mechanical wire drawing, mechanical polishing, sandblasting

“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

we can produce seamless aluminum tube, aluminum bar, aluminum pipe, and industry aluminum profiles, alloy series from 1xxx to 7xxx, temper O H112 H24 T3 T4 T5 T6 T8 T651 Etc.

Aluminum extrusion equipment including 3600 tons and 2800 tons extruding machine, 1350 tons 1300 tons and 880 tons double-acting extruding machine, 800 tons reverse extruding machine, 630 tons 500 tons extruding machine, tension straightening machine, 11 rollers straighter, tube drawing mill, rod drawing machine, 400 KW vertical quench furnace , Ancillary equipment including nitriding furnace, homogeneous furnace, and ageing oven, eight set of intermediate frequency induction furnace and oxidation ponds.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”

Aluminum tube is a kind of non-ferrous metal tube, which refers to a metal tubular material that is made of pure aluminum or aluminum alloy by extrusion processing to be hollow along its full length in the longitudinal direction.

It is widely used in industries such as automobiles, ships, aerospace, aviation, electrical appliances, agriculture, electromechanical and household appliances.

Classification of aluminum tube/pipe

Aluminum tubes are mainly divided into the following types:

Divided by shape: square tube, round tube, pattern tube, special-shaped tube, global aluminum tube.

According to the extrusion method: seamless aluminum tube and ordinary extruded tube

According to the precision: ordinary aluminum tubes and precision aluminum tubes, of which precision aluminum tubes generally need to be reprocessed after extrusion, such as cold drawing, fine drawing, and rolling.

According to thickness: ordinary aluminum tube and thin-walled aluminum tube

Performance: corrosion resistance, light weight.

Aluminum tube advantages: First, welding technology advantages: the welding technology of thin-walled copper-aluminum tubes suitable for industrialized production is known as a world-class problem and is a key technology for replacing copper with aluminum for connecting pipes for air conditioners.

The second is the service life advantage: from the perspective of the inner wall of the aluminum tube, since the refrigerant does not contain moisture, the inner wall of the copper-aluminum connecting tube will not corrode.

The third is the energy-saving advantage: the lower the heat transfer efficiency of the connecting pipe between the indoor unit and the outdoor unit of the air conditioner, the more energy-saving, or in other words, the better the heat insulation effect, the more energy-saving.

Fourth, excellent bending performance, easy to install and move

Surface treatment

Chemical treatment: oxidation, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer

Anodized Yucheng carved round tube

Anodized Yucheng carved round tube

Mechanical treatment: mechanical wire drawing, mechanical polishing, sandblasting

“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

we can produce seamless aluminum tube, aluminum bar, aluminum pipe, and industry aluminum profiles, alloy series from 1xxx to 7xxx, temper O H112 H24 T3 T4 T5 T6 T8 T651 Etc.

Aluminum extrusion equipment including 3600 tons and 2800 tons extruding machine, 1350 tons 1300 tons and 880 tons double-acting extruding machine, 800 tons reverse extruding machine, 630 tons 500 tons extruding machine, tension straightening machine, 11 rollers straighter, tube drawing mill, rod drawing machine, 400 KW vertical quench furnace , Ancillary equipment including nitriding furnace, homogeneous furnace, and ageing oven, eight set of intermediate frequency induction furnace and oxidation ponds.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”