Aluminum strip/coils 1000series, 3000series, 5000series, 6000series

Short Description:


Product Detail

Product Tags

*We can provide main products including: aluminum and aluminum alloy plate, pattern aluminum plate, aluminum coil, color coated aluminum coil, aluminum circles,with a wide range of commercial alloys, 1060, 1070, 1100, 2A12, 2024, 3003, 3004,3105, 5052, 5083, 5754, 6061, 6063, 6082, 7075 etc .Temper H24 H18 H16 H111 H112 O T3 T351 T4 T6 T651 etc

Its main products appliance in aerospace, aircraft, shipping, chemical industry, transportation, electronic and electrical, especially these products can fill the blank in China market with its super size, high precious and accurate Al hard alloy.

Specification of aluminum strip

Alloy number: 1060, 1070, 1100, 2A12, 2024, 3003,3004, 3105, 5052, 5083, 5754, 6061,

6063, 6082, 7075 etc

Temper: H32 H24 H16 H18 O H111 H112 T3 T351 T4 T42 T6 T651
Thickness: Min 0.2mm
Width : 21-500mm
Length: Coil or plate
Surface treatment Mill finish,embossing, anodized, color coating, Polishing

PRODUCT DESCRIPTION

The raw materials of aluminum strip (Aluminium strip/Aluminum strip) are pure aluminum or aluminum alloy cast-rolled aluminum coils, hot-rolled aluminum coils, which are rolled into thin-plate aluminum coils of different thicknesses and widths by a cold rolling mill, and then slitted according to the application. The machine slits longitudinally into aluminum strips of different widths.

Product category
The alloy grades of commonly used aluminum strips are 1050, 1060, 1070, 1100, 3003, 3004, 5005, 5052, 8011, etc. Commonly used states include O state and H state. O means soft state, H means hard state. After O and H, numbers can be used to indicate the degree of hardness and annealing.
The specific uses of aluminum strip mainly include: transformer aluminum strip (transformer aluminum foil), aluminum strip for high-frequency welding hollow aluminum strip, aluminum strip for fin radiator, aluminum strip for cable, aluminum strip for stamping, aluminum strip for aluminum edge strip, etc.
The categories of aluminum alloy belts are: pure aluminum belt, transformer aluminum belt, super-hard aluminum belt, all-soft aluminum belt, semi-hard aluminum belt, and rust-proof aluminum belt.

APPLICATION

There are many uses of aluminum tape, such as: aluminum-plastic composite pipes, cables, optical cables, transformers, heaters, blinds and so on.

1060 Where high corrosion resistance and formability are required, but the strength requirements are not high, chemical equipment is its typical use

1100 is used for processing parts that require good formability and high corrosion resistance but do not require high strength, such as chemical products, food industry equipment and storage containers, thin plate processing parts, deep drawing or spinning concave vessels, Welding parts, heat exchangers, printed boards, nameplates, reflectors

3004 Plate, thick plate, stretched tube. As long as the extruded tube is used for the body of all aluminum cans, it requires higher parts than 3003 alloy, chemical product production and storage devices, thin plate processing parts, building baffles, cable ducts, sewers, and various lighting components.

3003 board. Strip. Foil. Thick plates, stretched tubes. Squeeze the tube. type. Baton. Wire. Cold-worked bars, cold-worked wires, rivet wires, forgings, foils, and heat sink materials are mainly used to process parts that require good formability, high corrosion resistance, or good weldability, or those that require these properties There are workpieces that require higher strength than 1*** series alloys, such as tanks and tanks for transporting liquids, pressure tanks, storage devices, heat exchangers, chemical equipment, aircraft fuel tanks, oil ducts, reflectors, kitchen equipment, washing machine cylinders Body, rivets, welding wire.

5052 This alloy has good forming performance, corrosion resistance, candle resistance, fatigue strength and medium static strength. It is used to manufacture aircraft fuel tanks, oil pipes, and sheet metal parts of transportation vehicles and ships, instruments, street lamp brackets and rivets , Hardware products, etc.

PRODUCT PICTURES

High-quality-1060-1100-3003-3105-5052-2

High-quality-1060-1100-3003-3105-5052-2

High-quality-1060-1100-3003-3105-5052-2

COMPANY PROFILE

Aluminum sheet  plate (1)

"Jinan Huifeng aluminium Co., LTD" restructured from state-run enterprise , located in China's “rose town "—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

The aluminum coil equipment including 1850 mm hot rolling mill , three sets of 1850 mm & two sets of 1450mm cold rolling mill, flying shear machine six sets, bending straightening six sets, a 660 precision saw cutting machine , 260 meters roller coating production line.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer's requirements.

Meeting buyer's demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on "provide best products satisfying customers, quick response and full service rewarding customers"

Equipments Quantity Thickness range Width range Length range Max loading weight
Hot rolling mill 1 25-200mm 1000-2600mm -------------  
Continuous casting rolling mill 23 6.0-10.0mm 1000-2000mm ------------- 15000kgs
Cold rolling mill 2 0.1-6.0mm 900-1700mm ------------- 12000kgs
High accuracy cold rolling line 1 0.1-1.0mm 650-1420mm ------------- OD 2000mm
Annealer 14x40T ------------- -------------- ------------- -------------
Coating line 3 0.15-1.5mm 600-1600mm ------------- 5000kgs
Embossing line 1 0.2-1.2mm 350-1300mm ------------- 8500kgs
Straightening line 1 0.1-2.0mm 600-1700mm ------------- 10000kgs
Slitting line 1 0.2-3.0mm 21-1595mm ------------- 10000kgs
Wave shearing line 1 0.13-0.5mm 550-1230mm ------------- 10000kgs
Shearing line 3 0.125-4.0mm Max 1700mm ------------- 10000kgs

Aluminum sheet  plate (1)

PACKING

Aluminum sheet  plate (1)

Aluminum sheet  plate (1)

Aluminum sheet  plate (1)

Aluminum sheet  plate (1)


  • Previous:
  • Next:

  • Related Products