Bottom price Aluminum Hollow Rectangular Bar - Good reputation extruded alloy 6061 6082 5083 2024 7075 round aluminum bar – Huifeng

Specification of aluminum bar
Alloy: 2A12, 2014, 2014A, 2017A, 2024, 3003, 5083, 6005A, 6060, 6061, 6063, 6063A, 6082, 6463, 7020, 7075 etc

Temper: O H112 T3 T351 T4 T42 T5 T6 T651

Out diameter: 10-260mm

Length: 500-6000mm

Sharpe: Round, Square, Rectangle, Hexagonal

According to the different metal elements contained in aluminum rods, aluminum rods can be roughly divided into 8 categories, that is, they can be divided into 9 series:

1. The 1000 series aluminum rods represent the 1050, 1060, and 1100 series. In all series, the 1000 series belongs to the series with the most aluminum content. The purity can reach more than 99.00%. Because it does not contain other technical elements, the production process is relatively simple and the price is relatively cheap. It is currently the most commonly used series in conventional industries. Most of the products circulating in the market are 1050 and 1060 series. The 1000 series aluminum rods determine the minimum aluminum content of this series according to the last two Arabic numerals. For example, the last two Arabic numerals of the 1050 series are 50. According to the international brand naming principle, the aluminum content must reach 99.5% or more to be a qualified product. my country’s aluminum alloy technical standard (gB/T3880-2006) also clearly stipulates that the aluminum content of 1050 reaches 99.5%. Similarly, the aluminum content of 1060 series aluminum rods must reach 99.6% or more.

2. 2000 series aluminum rods represent 2A16 (LY16) and 2A02 (LY6). The 2000 series aluminum rods are characterized by high hardness, with the highest content of copper, which is about 3-5%. The 2000 series aluminum rods belong to aviation aluminum materials, which are not often used in conventional industries.
2024 is a typical hard aluminum alloy in the aluminum-copper-magnesium series. It is a heat-treatable alloy with high strength, easy processing, easy turning, and general corrosion resistance.
After heat treatment (T3, T4, T351), the mechanical properties of 2024 aluminum rods are significantly improved. Its T3 state parameters are as follows: tensile strength 470MPa, 0.2% yield strength 325MPa, elongation: 10%, fatigue strength 105MPa, hardness 120HB.
The main uses of 2024 aluminum rods: aircraft structure, rivets, truck wheel hubs, propeller components and other various structural parts

3. 3000 series aluminum rods mainly represent 3003 and 3A21. The production technology of 3000 series aluminum rods in my country is relatively excellent. 3000 series aluminum rods are made of manganese as the main component. The content is between 1.0-1.5, which is a series with better anti-rust function.

4. 4000 series aluminum rods The representative is 4A01 4000 series aluminum rods belong to the series with higher silicon content. Usually the silicon content is between 4.5-6.0%. It belongs to construction materials, mechanical parts, forging materials, welding materials; low melting point, good corrosion resistance, product description: heat-resistant and wear-resistant

5. The 5000 series aluminum rods represent the 5052, 5005, 5083, and 5A05 series. The 5000 series aluminum rods belong to the more commonly used alloy aluminum rod series, the main element is magnesium, and the magnesium content is between 3-5%. It can also be called aluminum-magnesium alloy. The main features are low density, high tensile strength and high elongation. In the same area, the weight of aluminum-magnesium alloy is lower than other series, and it is also widely used in conventional industries. In my country, the 5000 series aluminum rod is one of the more mature aluminum rod series.

6. 6000 series aluminum rods represent 6061 and 6063 mainly containing magnesium and silicon. Therefore, the advantages of 4000 series and 5000 series are concentrated. 6061 is a cold-treated aluminum forging product, suitable for applications with high requirements for corrosion resistance and oxidation. . Good workability, easy coating, and good processability.

7. 7000 series aluminum rods represent 7075 and mainly contain zinc. It also belongs to the aviation series. It is an aluminum-magnesium-zinc-copper alloy, a heat-treatable alloy, and a super-hard aluminum alloy with good wear resistance. It basically depends on imports, and my country’s production technology needs to be improved.

8. 8000 series aluminum rods The more commonly used 8011 belongs to other series, and most of the applications are aluminum foil, which is not commonly used in the production of aluminum rods.

“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

we can produce seamless aluminum tube, aluminum bar, aluminum pipe, and industry aluminum profiles, alloy series from 1xxx to 7xxx, temper O H112 H24 T3 T4 T5 T6 T8 T651 Etc.

Aluminum extrusion equipment including 3600 tons and 2800 tons extruding machine, 1350 tons 1300 tons and 880 tons double-acting extruding machine, 800 tons reverse extruding machine, 630 tons 500 tons extruding machine, tension straightening machine, 11 rollers straighter, tube drawing mill, rod drawing machine, 400 KW vertical quench furnace , Ancillary equipment including nitriding furnace, homogeneous furnace, and ageing oven, eight set of intermediate frequency induction furnace and oxidation ponds.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”

“Jinan Huifeng aluminium Co., LTD”,provide full range services of aluminum tube including: extrusion, anodizing, machining and PVDF painting .have a wide range of commercial alloys, 2A12, 2014, 2014A, 2017A, 2024, 3003, 5A02, 5083, 6005A, 6060, 6061, 6063, 6082, 6463, 7020, 7075 etc .Temper H111 O T3 T351 T42 T5 T6 T651

Aluminum tube is a kind of non-ferrous metal tube, which refers to a metal tubular material that is made of pure aluminum or aluminum alloy by extrusion processing to be hollow along its full length in the longitudinal direction.

It is widely used in industries such as automobiles, ships, aerospace, aviation, electrical appliances, agriculture, electromechanical and household appliances.

Classification of aluminum tube/pipe

Aluminum tubes are mainly divided into the following types:

Divided by shape: square tube, round tube, pattern tube, special-shaped tube, global aluminum tube.

According to the extrusion method: seamless aluminum tube and ordinary extruded tube

According to the precision: ordinary aluminum tubes and precision aluminum tubes, of which precision aluminum tubes generally need to be reprocessed after extrusion, such as cold drawing, fine drawing, and rolling.

According to thickness: ordinary aluminum tube and thin-walled aluminum tube

Performance: corrosion resistance, light weight.

Aluminum tube advantages: First, welding technology advantages: the welding technology of thin-walled copper-aluminum tubes suitable for industrialized production is known as a world-class problem and is a key technology for replacing copper with aluminum for connecting pipes for air conditioners.

The second is the service life advantage: from the perspective of the inner wall of the aluminum tube, since the refrigerant does not contain moisture, the inner wall of the copper-aluminum connecting tube will not corrode.

The third is the energy-saving advantage: the lower the heat transfer efficiency of the connecting pipe between the indoor unit and the outdoor unit of the air conditioner, the more energy-saving, or in other words, the better the heat insulation effect, the more energy-saving.

Fourth, excellent bending performance, easy to install and move

Surface treatment

Chemical treatment: oxidation, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer

Anodized Yucheng carved round tube

Anodized Yucheng carved round tube

Mechanical treatment: mechanical wire drawing, mechanical polishing, sandblasting

“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

we can produce seamless aluminum tube, aluminum bar, aluminum pipe, and industry aluminum profiles, alloy series from 1xxx to 7xxx, temper O H112 H24 T3 T4 T5 T6 T8 T651 Etc.

Aluminum extrusion equipment including 3600 tons and 2800 tons extruding machine, 1350 tons 1300 tons and 880 tons double-acting extruding machine, 800 tons reverse extruding machine, 630 tons 500 tons extruding machine, tension straightening machine, 11 rollers straighter, tube drawing mill, rod drawing machine, 400 KW vertical quench furnace , Ancillary equipment including nitriding furnace, homogeneous furnace, and ageing oven, eight set of intermediate frequency induction furnace and oxidation ponds.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”

Aluminum tube is a kind of non-ferrous metal tube, which refers to a metal tubular material that is made of pure aluminum or aluminum alloy by extrusion processing to be hollow along its full length in the longitudinal direction.

It is widely used in industries such as automobiles, ships, aerospace, aviation, electrical appliances, agriculture, electromechanical and household appliances.

Classification of aluminum tube/pipe

Aluminum tubes are mainly divided into the following types:

Divided by shape: square tube, round tube, pattern tube, special-shaped tube, global aluminum tube.

According to the extrusion method: seamless aluminum tube and ordinary extruded tube

According to the precision: ordinary aluminum tubes and precision aluminum tubes, of which precision aluminum tubes generally need to be reprocessed after extrusion, such as cold drawing, fine drawing, and rolling.

According to thickness: ordinary aluminum tube and thin-walled aluminum tube

Performance: corrosion resistance, light weight.

Aluminum tube advantages: First, welding technology advantages: the welding technology of thin-walled copper-aluminum tubes suitable for industrialized production is known as a world-class problem and is a key technology for replacing copper with aluminum for connecting pipes for air conditioners.

The second is the service life advantage: from the perspective of the inner wall of the aluminum tube, since the refrigerant does not contain moisture, the inner wall of the copper-aluminum connecting tube will not corrode.

The third is the energy-saving advantage: the lower the heat transfer efficiency of the connecting pipe between the indoor unit and the outdoor unit of the air conditioner, the more energy-saving, or in other words, the better the heat insulation effect, the more energy-saving.

Fourth, excellent bending performance, easy to install and move

Surface treatment

Chemical treatment: oxidation, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer

Anodized Yucheng carved round tube

Anodized Yucheng carved round tube

Mechanical treatment: mechanical wire drawing, mechanical polishing, sandblasting

“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

we can produce seamless aluminum tube, aluminum bar, aluminum pipe, and industry aluminum profiles, alloy series from 1xxx to 7xxx, temper O H112 H24 T3 T4 T5 T6 T8 T651 Etc.

Aluminum extrusion equipment including 3600 tons and 2800 tons extruding machine, 1350 tons 1300 tons and 880 tons double-acting extruding machine, 800 tons reverse extruding machine, 630 tons 500 tons extruding machine, tension straightening machine, 11 rollers straighter, tube drawing mill, rod drawing machine, 400 KW vertical quench furnace , Ancillary equipment including nitriding furnace, homogeneous furnace, and ageing oven, eight set of intermediate frequency induction furnace and oxidation ponds.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”