Cheap PriceList for Textured Aluminum Sheet - ASTM 7075 T6 Trade assurance Aluminum sheet aluminum plate – Huifeng

We can provide main products including: aluminum and aluminum alloy plate, pattern aluminum plate, aluminum coil, color coated aluminum coil, aluminum circles,with a wide range of commercial alloys, 1060, 1070, 1100, 2A12, 2024, 3003, 3004,3105, 5052, 5083, 5754, 6061, 6063, 6082, 7075 etc .Temper H24 H18 H16 H111 H112 O T3 T351 T4 T6 T651 etc

Its main products appliance in aerospace, aircraft, shipping, chemical industry, transportation, electronic and electrical, especially these products can fill the blank in China market with its super size, high precious and accurate Al hard alloy.

Aluminum plate refers to aluminum material with a thickness of 0.2mm or more to 500mm or less, a width of 200mm or more, and a length of 16m or less. It is called aluminum sheet or aluminum plate, 0.2mm or less is aluminum, and 200mm width or less is the row or strip.

Aluminum plates/sheets are usually divided into the following two categories:

1.According to alloy composition:

High-purity aluminum plate (rolled from high-purity aluminum with a content of 99.9 or more)

Pure aluminum plate (the composition is basically made of pure aluminum rolled)

Alloy aluminum plate (composed of aluminum and auxiliary alloys, usually aluminum-copper, aluminum-manganese, aluminum-silicon, aluminum-magnesium, etc.)

Composite aluminum plate or brazed plate (a special purpose aluminum plate material is obtained through a variety of material composite methods)

Aluminum-clad aluminum plate (a thin aluminum plate is coated on the outside of the aluminum plate for special purposes)

2. Divided by thickness: (unit mm)

Thin aluminum sheet     0.15-2.0

Regular aluminum sheet   2.0-6.0

Medium aluminum plate   6.0-25.0

Thick aluminum plate      25-200

Super thick aluminum plate  above 200

Application of aluminum sheet:

1. Lighting

2. Solar reflective sheet

3. Building appearance

4. Interior decoration: ceiling, wall, etc.

5. Furniture, cabinets

6. Elevator

7. Signs, nameplates,Brands, luggage

8, interior and exterior decorations of cars

9. Interior decorations: such as photo frames

10, household appliances: refrigerators, microwave ovens, audio equipment, etc.

11. Aerospace and military aspects, such as China’s large aircraft manufacturing, Shenzhou spacecraft series, satellites, etc. .

12. Machining parts processing.

13. Mold manufacturing.

14. Chemical industry/heat preservation pipe coating.

15. High-quality ship board

Brushed aluminum plate: The manufacturing process of repeatedly scraping the aluminum plate out of lines with sandpaper. The main process is divided into three parts: de-esterification, sand mill, and water washing. In the aluminum sheet wire drawing process, the special coating technology after anodizing can make the surface of the aluminum sheet generate a coating layer containing the metal component, clearly showing every fine wire mark, so that the metal matte is full of fine hair and Silk luster.

Anodized aluminum plate: the aluminum plate is formed by placing the aluminum plate in the corresponding electrolyte (such as sulfuric acid, chromic acid, oxalic acid, etc.) as the anode, and electrolyzing it under specific conditions and applied current. The aluminum plate of the anode is oxidized, and a thin layer of aluminum oxide is formed on the surface, the thickness is 5-20 microns, and the hard anodized film can reach 60-200 microns.

PS aluminum plate (advertising aluminum plate, also known as printed zinc plate, newspaper plate): that is an aluminum plate with a printed pattern thickness of 025 or 03 on the back.

Mirror aluminum plate: refers to the aluminum plate that is processed by rolling, polishing and other methods to make the surface of the plate show a mirror effect.

Embossed aluminum plate can also be called aluminum embossed plate: it belongs to aluminum products that form various patterns on the surface after calendering on the basis of aluminum plate. It is widely used and mainly used in packaging, construction, curtain walls, etc.

“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

The aluminum coil equipment including 1850 mm hot rolling mill , three sets of 1850 mm & two sets of 1450mm cold rolling mill, flying shear machine six sets, bending straightening six sets, a 660 precision saw cutting machine , 260 meters roller coating production line.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”

“Jinan Huifeng aluminium Co., LTD”,provide full range services of aluminum tube including: extrusion, anodizing, machining and PVDF painting .have a wide range of commercial alloys, 2A12, 2014, 2014A, 2017A, 2024, 3003, 5A02, 5083, 6005A, 6060, 6061, 6063, 6082, 6463, 7020, 7075 etc .Temper H111 O T3 T351 T42 T5 T6 T651

Aluminum tube is a kind of non-ferrous metal tube, which refers to a metal tubular material that is made of pure aluminum or aluminum alloy by extrusion processing to be hollow along its full length in the longitudinal direction.

It is widely used in industries such as automobiles, ships, aerospace, aviation, electrical appliances, agriculture, electromechanical and household appliances.

Classification of aluminum tube/pipe

Aluminum tubes are mainly divided into the following types:

Divided by shape: square tube, round tube, pattern tube, special-shaped tube, global aluminum tube.

According to the extrusion method: seamless aluminum tube and ordinary extruded tube

According to the precision: ordinary aluminum tubes and precision aluminum tubes, of which precision aluminum tubes generally need to be reprocessed after extrusion, such as cold drawing, fine drawing, and rolling.

According to thickness: ordinary aluminum tube and thin-walled aluminum tube

Performance: corrosion resistance, light weight.

Aluminum tube advantages: First, welding technology advantages: the welding technology of thin-walled copper-aluminum tubes suitable for industrialized production is known as a world-class problem and is a key technology for replacing copper with aluminum for connecting pipes for air conditioners.

The second is the service life advantage: from the perspective of the inner wall of the aluminum tube, since the refrigerant does not contain moisture, the inner wall of the copper-aluminum connecting tube will not corrode.

The third is the energy-saving advantage: the lower the heat transfer efficiency of the connecting pipe between the indoor unit and the outdoor unit of the air conditioner, the more energy-saving, or in other words, the better the heat insulation effect, the more energy-saving.

Fourth, excellent bending performance, easy to install and move

Surface treatment

Chemical treatment: oxidation, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer

Anodized Yucheng carved round tube

Anodized Yucheng carved round tube

Mechanical treatment: mechanical wire drawing, mechanical polishing, sandblasting

“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

we can produce seamless aluminum tube, aluminum bar, aluminum pipe, and industry aluminum profiles, alloy series from 1xxx to 7xxx, temper O H112 H24 T3 T4 T5 T6 T8 T651 Etc.

Aluminum extrusion equipment including 3600 tons and 2800 tons extruding machine, 1350 tons 1300 tons and 880 tons double-acting extruding machine, 800 tons reverse extruding machine, 630 tons 500 tons extruding machine, tension straightening machine, 11 rollers straighter, tube drawing mill, rod drawing machine, 400 KW vertical quench furnace , Ancillary equipment including nitriding furnace, homogeneous furnace, and ageing oven, eight set of intermediate frequency induction furnace and oxidation ponds.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”

Aluminum tube is a kind of non-ferrous metal tube, which refers to a metal tubular material that is made of pure aluminum or aluminum alloy by extrusion processing to be hollow along its full length in the longitudinal direction.

It is widely used in industries such as automobiles, ships, aerospace, aviation, electrical appliances, agriculture, electromechanical and household appliances.

Classification of aluminum tube/pipe

Aluminum tubes are mainly divided into the following types:

Divided by shape: square tube, round tube, pattern tube, special-shaped tube, global aluminum tube.

According to the extrusion method: seamless aluminum tube and ordinary extruded tube

According to the precision: ordinary aluminum tubes and precision aluminum tubes, of which precision aluminum tubes generally need to be reprocessed after extrusion, such as cold drawing, fine drawing, and rolling.

According to thickness: ordinary aluminum tube and thin-walled aluminum tube

Performance: corrosion resistance, light weight.

Aluminum tube advantages: First, welding technology advantages: the welding technology of thin-walled copper-aluminum tubes suitable for industrialized production is known as a world-class problem and is a key technology for replacing copper with aluminum for connecting pipes for air conditioners.

The second is the service life advantage: from the perspective of the inner wall of the aluminum tube, since the refrigerant does not contain moisture, the inner wall of the copper-aluminum connecting tube will not corrode.

The third is the energy-saving advantage: the lower the heat transfer efficiency of the connecting pipe between the indoor unit and the outdoor unit of the air conditioner, the more energy-saving, or in other words, the better the heat insulation effect, the more energy-saving.

Fourth, excellent bending performance, easy to install and move

Surface treatment

Chemical treatment: oxidation, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer

Anodized Yucheng carved round tube

Anodized Yucheng carved round tube

Mechanical treatment: mechanical wire drawing, mechanical polishing, sandblasting

“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

we can produce seamless aluminum tube, aluminum bar, aluminum pipe, and industry aluminum profiles, alloy series from 1xxx to 7xxx, temper O H112 H24 T3 T4 T5 T6 T8 T651 Etc.

Aluminum extrusion equipment including 3600 tons and 2800 tons extruding machine, 1350 tons 1300 tons and 880 tons double-acting extruding machine, 800 tons reverse extruding machine, 630 tons 500 tons extruding machine, tension straightening machine, 11 rollers straighter, tube drawing mill, rod drawing machine, 400 KW vertical quench furnace , Ancillary equipment including nitriding furnace, homogeneous furnace, and ageing oven, eight set of intermediate frequency induction furnace and oxidation ponds.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”