Factory wholesale Aliuminium Coil For Arcitectural Decoration - China factory 5052 PVDF color coated aluminum coil thickness 0.7mm – Huifeng

Color-coated aluminum (color-coated aluminum coil), common polyester color-coated aluminum (color-coated aluminum coil), is widely used in aluminum honeycomb panels, aluminum ceilings, roof surfaces, and leftover materials. Its performance is very stable, and it is not easy to be corroded. Kind of new materials.

Its main products appliance in aerospace, aircraft, shipping, chemical industry, transportation, electronic and electrical, especially these products can fill the blank in China market with its super size, high precious and accurate Al hard alloy.

Specification of aluminum coil
Alloy number: 1060, 1070, 1100, 2A12, 2024, 3003,3004, 3105, 5052, 5083, 5754, 6061, 6063, 6082, 7075 etc
Temper: H32 H24 H16 H18 O H111 H112 T3 T351 T4 T42 T6 T651
Thickness: 0.1-200mm
Width of DC: 100-2600mm
Width of CC 100-1700mm
Length: coil
Surface treatment: Mill finish,embossing, anodized, color coating, Polishing

Color-coated aluminum coil coatings are divided into: polyester coated aluminum coil (PE), fluorocarbon coated aluminum coil (PVDF). The polyester coating formed by baking the surface of the aluminum plate for many times can form a continuous and firm adhesion. The solid film has protective decorative properties. It is an anti-UV coating. The polyester resin uses the ester bond-containing high molecular polymer in the main chain as the monomer, and the alkyd resin is added. The ultraviolet absorber can be divided into sub-gloss and high-gloss series according to the gloss. It can impart rich colors to colored aluminum products, and has good gloss and smoothness, as well as superior texture and feel, and can also increase the sense of layering and three-dimensionality. It can protect objects from being exposed to the atmosphere and being attacked by ultraviolet rays, wind, rain, frost, snow and freezing; the coating can play a protective role due to temperature differences, freeze-thaw cycles, corrosive gases and microorganisms. Especially suitable for interior decoration and advertising boards

Fluorocarbon Coated Color Coated Aluminum Coil (PVDF)
Fluorocarbon coating is PVDF resin mainly refers to the coating of vinylidene fluoride homopolymer or copolymer of vinylidene fluoride and other small amounts of fluorine-containing vinyl monomers. The chemical structure of the fluoric acid base material is combined with a fluorine/carbon bond. The stability and firmness of this chemical structure make the physical properties of fluorocarbon coatings different from ordinary coatings. In addition to the mechanical properties of wear resistance, impact resistance has excellent performance, especially in the harsh climate and environment shows long-term fading resistance, anti-ultraviolet performance. After being grilled at high temperature to form a film, the molecular structure in the coating is tight and has super weather resistance. Fluorocarbon coatings can be divided into traditional fluorocarbon and nano fluorocarbon coatings according to the surface film formation structure.

Color-coated aluminum coil has a rich color range, whether it is for civil residences, large-scale commercial outlets or large-scale exhibition centers, color-coated aluminum coils can add color to it. Good plasticity and machining properties make it an ideal material for various architectural shapes. Color-coated aluminum coils have provided architects, designers and owners with a personalized color space for exterior walls and ceilings, and are also the most ideal material for architectural modeling. Whether it is a multi-functional large-scale building or a unique and creative new-style building, the color-coated aluminum coil can always meet the different requirements of modern and classical architectural styles, making the building more colorful. The products are used in many fields such as electronic appliances, instrumentation, lighting, packaging, home decoration and so on.
The product uses a wide range: construction (aluminum composite panel, aluminum honeycomb, roof corrugated board, fireproof veneer, aluminum ceiling, shutters, rolling door, garage door, awning, falling gutter), electronic appliances (computer case, electrical panel) , Lighting, furniture, solar reflectors, air-conditioning ducts, etc.

“Jinan Huifeng aluminium Co., LTD”,provide full range services of aluminum tube including: extrusion, anodizing, machining and PVDF painting .have a wide range of commercial alloys, 2A12, 2014, 2014A, 2017A, 2024, 3003, 5A02, 5083, 6005A, 6060, 6061, 6063, 6082, 6463, 7020, 7075 etc .Temper H111 O T3 T351 T42 T5 T6 T651

Aluminum tube is a kind of non-ferrous metal tube, which refers to a metal tubular material that is made of pure aluminum or aluminum alloy by extrusion processing to be hollow along its full length in the longitudinal direction.

It is widely used in industries such as automobiles, ships, aerospace, aviation, electrical appliances, agriculture, electromechanical and household appliances.

Classification of aluminum tube/pipe

Aluminum tubes are mainly divided into the following types:

Divided by shape: square tube, round tube, pattern tube, special-shaped tube, global aluminum tube.

According to the extrusion method: seamless aluminum tube and ordinary extruded tube

According to the precision: ordinary aluminum tubes and precision aluminum tubes, of which precision aluminum tubes generally need to be reprocessed after extrusion, such as cold drawing, fine drawing, and rolling.

According to thickness: ordinary aluminum tube and thin-walled aluminum tube

Performance: corrosion resistance, light weight.

Aluminum tube advantages: First, welding technology advantages: the welding technology of thin-walled copper-aluminum tubes suitable for industrialized production is known as a world-class problem and is a key technology for replacing copper with aluminum for connecting pipes for air conditioners.

The second is the service life advantage: from the perspective of the inner wall of the aluminum tube, since the refrigerant does not contain moisture, the inner wall of the copper-aluminum connecting tube will not corrode.

The third is the energy-saving advantage: the lower the heat transfer efficiency of the connecting pipe between the indoor unit and the outdoor unit of the air conditioner, the more energy-saving, or in other words, the better the heat insulation effect, the more energy-saving.

Fourth, excellent bending performance, easy to install and move

Surface treatment

Chemical treatment: oxidation, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer

Anodized Yucheng carved round tube

Anodized Yucheng carved round tube

Mechanical treatment: mechanical wire drawing, mechanical polishing, sandblasting

“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

we can produce seamless aluminum tube, aluminum bar, aluminum pipe, and industry aluminum profiles, alloy series from 1xxx to 7xxx, temper O H112 H24 T3 T4 T5 T6 T8 T651 Etc.

Aluminum extrusion equipment including 3600 tons and 2800 tons extruding machine, 1350 tons 1300 tons and 880 tons double-acting extruding machine, 800 tons reverse extruding machine, 630 tons 500 tons extruding machine, tension straightening machine, 11 rollers straighter, tube drawing mill, rod drawing machine, 400 KW vertical quench furnace , Ancillary equipment including nitriding furnace, homogeneous furnace, and ageing oven, eight set of intermediate frequency induction furnace and oxidation ponds.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”

Aluminum tube is a kind of non-ferrous metal tube, which refers to a metal tubular material that is made of pure aluminum or aluminum alloy by extrusion processing to be hollow along its full length in the longitudinal direction.

It is widely used in industries such as automobiles, ships, aerospace, aviation, electrical appliances, agriculture, electromechanical and household appliances.

Classification of aluminum tube/pipe

Aluminum tubes are mainly divided into the following types:

Divided by shape: square tube, round tube, pattern tube, special-shaped tube, global aluminum tube.

According to the extrusion method: seamless aluminum tube and ordinary extruded tube

According to the precision: ordinary aluminum tubes and precision aluminum tubes, of which precision aluminum tubes generally need to be reprocessed after extrusion, such as cold drawing, fine drawing, and rolling.

According to thickness: ordinary aluminum tube and thin-walled aluminum tube

Performance: corrosion resistance, light weight.

Aluminum tube advantages: First, welding technology advantages: the welding technology of thin-walled copper-aluminum tubes suitable for industrialized production is known as a world-class problem and is a key technology for replacing copper with aluminum for connecting pipes for air conditioners.

The second is the service life advantage: from the perspective of the inner wall of the aluminum tube, since the refrigerant does not contain moisture, the inner wall of the copper-aluminum connecting tube will not corrode.

The third is the energy-saving advantage: the lower the heat transfer efficiency of the connecting pipe between the indoor unit and the outdoor unit of the air conditioner, the more energy-saving, or in other words, the better the heat insulation effect, the more energy-saving.

Fourth, excellent bending performance, easy to install and move

Surface treatment

Chemical treatment: oxidation, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer

Anodized Yucheng carved round tube

Anodized Yucheng carved round tube

Mechanical treatment: mechanical wire drawing, mechanical polishing, sandblasting

“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

we can produce seamless aluminum tube, aluminum bar, aluminum pipe, and industry aluminum profiles, alloy series from 1xxx to 7xxx, temper O H112 H24 T3 T4 T5 T6 T8 T651 Etc.

Aluminum extrusion equipment including 3600 tons and 2800 tons extruding machine, 1350 tons 1300 tons and 880 tons double-acting extruding machine, 800 tons reverse extruding machine, 630 tons 500 tons extruding machine, tension straightening machine, 11 rollers straighter, tube drawing mill, rod drawing machine, 400 KW vertical quench furnace , Ancillary equipment including nitriding furnace, homogeneous furnace, and ageing oven, eight set of intermediate frequency induction furnace and oxidation ponds.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”