High Quality Aluminum Strip - Alloy 1050,1060,1070, 1100, 3A21, 3003, 3103, 3004 ,5052, 8011 low price Aluminium strip in coil (alu strip) – Huifeng

*We can provide main products including: aluminum and aluminum alloy plate, pattern aluminum plate, aluminum coil, color coated aluminum coil, aluminum circles,with a wide range of commercial alloys, 1060, 1070, 1100, 2A12, 2024, 3003, 3004,3105, 5052, 5083, 5754, 6061, 6063, 6082, 7075 etc .Temper H24 H18 H16 H111 H112 O T3 T351 T4 T6 T651 etc

Its main products appliance in aerospace, aircraft, shipping, chemical industry, transportation, electronic and electrical, especially these products can fill the blank in China market with its super size, high precious and accurate Al hard alloy.

The raw materials of aluminum strip (Aluminium strip/Aluminum strip) are pure aluminum or aluminum alloy cast-rolled aluminum coils, hot-rolled aluminum coils, which are rolled into thin-plate aluminum coils of different thicknesses and widths by a cold rolling mill, and then slitted according to the application. The machine slits longitudinally into aluminum strips of different widths.

Product category

The alloy grades of commonly used aluminum strips are 1050, 1060, 1070, 1100, 3003, 3004, 5005, 5052, 8011, etc. Commonly used states include O state and H state. O means soft state, H means hard state. After O and H, numbers can be used to indicate the degree of hardness and annealing.

The specific uses of aluminum strip mainly include: transformer aluminum strip (transformer aluminum foil), aluminum strip for high-frequency welding hollow aluminum strip, aluminum strip for fin radiator, aluminum strip for cable, aluminum strip for stamping, aluminum strip for aluminum edge strip, etc.

The categories of aluminum alloy belts are: pure aluminum belt, transformer aluminum belt, super-hard aluminum belt, all-soft aluminum belt, semi-hard aluminum belt, and rust-proof aluminum belt.

Application:

There are many uses of aluminum tape, such as: aluminum-plastic composite pipes, cables, optical cables, transformers, heaters, blinds and so on.

1060 Where high corrosion resistance and formability are required, but the strength requirements are not high, chemical equipment is its typical use

1100 is used for processing parts that require good formability and high corrosion resistance but do not require high strength, such as chemical products, food industry equipment and storage containers, thin plate processing parts, deep drawing or spinning concave vessels, Welding parts, heat exchangers, printed boards, nameplates, reflectors

3004 Plate, thick plate, stretched tube. As long as the extruded tube is used for the body of all aluminum cans, it requires higher parts than 3003 alloy, chemical product production and storage devices, thin plate processing parts, building baffles, cable ducts, sewers, and various lighting components.

3003 board. Strip. Foil. Thick plates, stretched tubes. Squeeze the tube. type. Baton. Wire. Cold-worked bars, cold-worked wires, rivet wires, forgings, foils, and heat sink materials are mainly used to process parts that require good formability, high corrosion resistance, or good weldability, or those that require these properties There are workpieces that require higher strength than 1*** series alloys, such as tanks and tanks for transporting liquids, pressure tanks, storage devices, heat exchangers, chemical equipment, aircraft fuel tanks, oil ducts, reflectors, kitchen equipment, washing machine cylinders Body, rivets, welding wire.

5052 This alloy has good forming performance, corrosion resistance, candle resistance, fatigue strength and medium static strength. It is used to manufacture aircraft fuel tanks, oil pipes, and sheet metal parts of transportation vehicles and ships, instruments, street lamp brackets and rivets , Hardware products, etc.

*”Jinan Huifeng aluminium Co., LTD”. Is a newly established aluminum processing production enterprise, restructured from state-run enterprise ,is located in China’s” rose town “- PingYin county of Jinan city territory, covers an area of more than 600 acres.

The main production equipment including  melting and casting equipment ,single machine frame double curly reversible hot rolling mill, cold rolling mill, cast-rolling machine, crosscut flying shear machine, bending straightening, precision saw cutting machine and 260 meters roller coating production line.

“Jinan Huifeng aluminium Co., LTD”,provide full range services of aluminum tube including: extrusion, anodizing, machining and PVDF painting .have a wide range of commercial alloys, 2A12, 2014, 2014A, 2017A, 2024, 3003, 5A02, 5083, 6005A, 6060, 6061, 6063, 6082, 6463, 7020, 7075 etc .Temper H111 O T3 T351 T42 T5 T6 T651

Aluminum tube is a kind of non-ferrous metal tube, which refers to a metal tubular material that is made of pure aluminum or aluminum alloy by extrusion processing to be hollow along its full length in the longitudinal direction.

It is widely used in industries such as automobiles, ships, aerospace, aviation, electrical appliances, agriculture, electromechanical and household appliances.

Classification of aluminum tube/pipe

Aluminum tubes are mainly divided into the following types:

Divided by shape: square tube, round tube, pattern tube, special-shaped tube, global aluminum tube.

According to the extrusion method: seamless aluminum tube and ordinary extruded tube

According to the precision: ordinary aluminum tubes and precision aluminum tubes, of which precision aluminum tubes generally need to be reprocessed after extrusion, such as cold drawing, fine drawing, and rolling.

According to thickness: ordinary aluminum tube and thin-walled aluminum tube

Performance: corrosion resistance, light weight.

Aluminum tube advantages: First, welding technology advantages: the welding technology of thin-walled copper-aluminum tubes suitable for industrialized production is known as a world-class problem and is a key technology for replacing copper with aluminum for connecting pipes for air conditioners.

The second is the service life advantage: from the perspective of the inner wall of the aluminum tube, since the refrigerant does not contain moisture, the inner wall of the copper-aluminum connecting tube will not corrode.

The third is the energy-saving advantage: the lower the heat transfer efficiency of the connecting pipe between the indoor unit and the outdoor unit of the air conditioner, the more energy-saving, or in other words, the better the heat insulation effect, the more energy-saving.

Fourth, excellent bending performance, easy to install and move

Surface treatment

Chemical treatment: oxidation, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer

Anodized Yucheng carved round tube

Anodized Yucheng carved round tube

Mechanical treatment: mechanical wire drawing, mechanical polishing, sandblasting

“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

we can produce seamless aluminum tube, aluminum bar, aluminum pipe, and industry aluminum profiles, alloy series from 1xxx to 7xxx, temper O H112 H24 T3 T4 T5 T6 T8 T651 Etc.

Aluminum extrusion equipment including 3600 tons and 2800 tons extruding machine, 1350 tons 1300 tons and 880 tons double-acting extruding machine, 800 tons reverse extruding machine, 630 tons 500 tons extruding machine, tension straightening machine, 11 rollers straighter, tube drawing mill, rod drawing machine, 400 KW vertical quench furnace , Ancillary equipment including nitriding furnace, homogeneous furnace, and ageing oven, eight set of intermediate frequency induction furnace and oxidation ponds.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”

Aluminum tube is a kind of non-ferrous metal tube, which refers to a metal tubular material that is made of pure aluminum or aluminum alloy by extrusion processing to be hollow along its full length in the longitudinal direction.

It is widely used in industries such as automobiles, ships, aerospace, aviation, electrical appliances, agriculture, electromechanical and household appliances.

Classification of aluminum tube/pipe

Aluminum tubes are mainly divided into the following types:

Divided by shape: square tube, round tube, pattern tube, special-shaped tube, global aluminum tube.

According to the extrusion method: seamless aluminum tube and ordinary extruded tube

According to the precision: ordinary aluminum tubes and precision aluminum tubes, of which precision aluminum tubes generally need to be reprocessed after extrusion, such as cold drawing, fine drawing, and rolling.

According to thickness: ordinary aluminum tube and thin-walled aluminum tube

Performance: corrosion resistance, light weight.

Aluminum tube advantages: First, welding technology advantages: the welding technology of thin-walled copper-aluminum tubes suitable for industrialized production is known as a world-class problem and is a key technology for replacing copper with aluminum for connecting pipes for air conditioners.

The second is the service life advantage: from the perspective of the inner wall of the aluminum tube, since the refrigerant does not contain moisture, the inner wall of the copper-aluminum connecting tube will not corrode.

The third is the energy-saving advantage: the lower the heat transfer efficiency of the connecting pipe between the indoor unit and the outdoor unit of the air conditioner, the more energy-saving, or in other words, the better the heat insulation effect, the more energy-saving.

Fourth, excellent bending performance, easy to install and move

Surface treatment

Chemical treatment: oxidation, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer

Anodized Yucheng carved round tube

Anodized Yucheng carved round tube

Mechanical treatment: mechanical wire drawing, mechanical polishing, sandblasting

“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

we can produce seamless aluminum tube, aluminum bar, aluminum pipe, and industry aluminum profiles, alloy series from 1xxx to 7xxx, temper O H112 H24 T3 T4 T5 T6 T8 T651 Etc.

Aluminum extrusion equipment including 3600 tons and 2800 tons extruding machine, 1350 tons 1300 tons and 880 tons double-acting extruding machine, 800 tons reverse extruding machine, 630 tons 500 tons extruding machine, tension straightening machine, 11 rollers straighter, tube drawing mill, rod drawing machine, 400 KW vertical quench furnace , Ancillary equipment including nitriding furnace, homogeneous furnace, and ageing oven, eight set of intermediate frequency induction furnace and oxidation ponds.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”