Manufacturer high quality 10-260mm 6061-t6 aluminum bar

Short Description:


Product Detail

Product Tags

Specification of aluminum bar
Alloy: 2A12, 2014, 2014A, 2017A, 2024, 3003, 5083, 6005A, 6060, 6061, 6063, 6063A, 6082, 6463,
7020, 7075 etc
Temper: O H112 T3 T351 T4 T42 T5 T6 T651
Out diameter: 10-260mm
Length: 500-6000mm
Sharpe Round, Square, Rectangle, Hexagonal
HTB1vJ1vQcfpK1RjSZFOq6y6nFXaU
According to the different metal elements contained in aluminum rods, aluminum rods can be roughly divided into 8 categories, that is, they can be divided into 9 series:

1. The 1000 series aluminum rods represent the 1050, 1060, and 1100 series. In all series, the 1000 series belongs to the series with the most aluminum content. The purity can reach more than 99.00%. Because it does not contain other technical elements, the production process is relatively simple and the price is relatively cheap. It is currently the most commonly used series in conventional industries. Most of the products circulating in the market are 1050 and 1060 series. The 1000 series aluminum rods determine the minimum aluminum content of this series according to the last two Arabic numerals. For example, the last two Arabic numerals of the 1050 series are 50. According to the international brand naming principle, the aluminum content must reach 99.5% or more to be a qualified product. my country’s aluminum alloy technical standard (gB/T3880-2006) also clearly stipulates that the aluminum content of 1050 reaches 99.5%. Similarly, the aluminum content of 1060 series aluminum rods must reach 99.6% or more.

2. 2000 series aluminum rods represent 2A16 (LY16) and 2A02 (LY6). The 2000 series aluminum rods are characterized by high hardness, with the highest content of copper, which is about 3-5%. The 2000 series aluminum rods belong to aviation aluminum materials, which are not often used in conventional industries.
2024 is a typical hard aluminum alloy in the aluminum-copper-magnesium series. It is a heat-treatable alloy with high strength, easy processing, easy turning, and general corrosion resistance.

After 2024 aluminum rods are heat treated (T3, T4, T351), the mechanical properties are significantly improved. Its T3 state parameters are as follows: tensile strength 470MPa, 0.2% yield strength 325MPa, elongation: 10%, fatigue strength 105MPa, hardness 120HB.

The main uses of 2024 aluminum rods: aircraft structure, rivets, truck wheel hubs, propeller components and other various structural parts

2. 3000 series aluminum rods mainly represent 3003 and 3A21. The production technology of 3000 series aluminum rods in my country is relatively excellent. 3000 series aluminum rods are made of manganese as the main component. The content is between 1.0-1.5, which is a series with better anti-rust function.

3. 4000 series aluminum rods The representative is 4A01 4000 series aluminum rods belong to the series with higher silicon content. Usually the silicon content is between 4.5-6.0%. It belongs to construction materials, mechanical parts, forging materials, welding materials; low melting point, good corrosion resistance, product description: heat-resistant and wear-resistant

4. The 5000 series aluminum rods represent the 5052, 5005, 5083, and 5A05 series. The 5000 series aluminum rods belong to the more commonly used alloy aluminum rod series, the main element is magnesium, and the magnesium content is between 3-5%. It can also be called aluminum-magnesium alloy. The main features are low density, high tensile strength and high elongation. In the same area, the weight of aluminum-magnesium alloy is lower than that of other series, and it is also widely used in conventional industries. In my country, the 5000 series aluminum rod is one of the more mature aluminum rod series.

5. 6000 series aluminum rods represent 6061 and 6063 mainly containing magnesium and silicon. Therefore, the advantages of 4000 series and 5000 series are concentrated. 6061 is a cold-treated aluminum forging product, suitable for applications with high requirements for corrosion resistance and oxidation. . Good workability, easy coating, and good processability.
HLB1iPQaUNjaK1RjSZFAq6zdLFXay

6. 7000 series aluminum rods represent 7075 and mainly contain zinc. It also belongs to the aerospace series. It is an aluminum-magnesium-zinc-copper alloy, a heat-treatable alloy, and a super-hard aluminum alloy with good wear resistance. Basically relying on imports, my country’s production technology needs to be improved.

7. 8000 series aluminum rods The more commonly used 8011 belongs to other series, and most of the applications are aluminum foil, which is not commonly used in the production of aluminum rods.

1. According to the different content of alloying elements, aluminum plates can be divided into:
1××× series is industrial pure aluminum (Al),
2××× series is aluminum-copper alloy aluminum plate (Al–Cu),
3××× series is aluminum Manganese alloy aluminum plate (Al–Mn),
4××× series is aluminum-silicon alloy aluminum plate (Al–Si),
5××× series is aluminum-magnesium alloy aluminum plate (Al–Mg),
6××× series is Aluminum-magnesium-silicon alloy aluminum plate (AL–Mg–Si), 7××× series is aluminum-zinc alloy aluminum plate [AL--Zn--Mg--(Cu)],
8××× series is aluminum and other elements . Generally, each series must be followed by three digits, and each digit must have a number or letter. The meaning is: the second digit indicates the number of controlled impurities; the third and fourth digits indicate the lowest percentage of pure aluminum content after the decimal point. content.
2. According to the shape, it can be divided into: round aluminum rod, square aluminum rod, hexagonal aluminum rod, trapezoidal aluminum rod, etc.

HLB1.gAhUCzqK1RjSZFpq6ykSXXal
HLB1o4Y.UwDqK1RjSZSyq6yxEVXab(1)HLB1DJIEUxnaK1RjSZFBq6AW7VXaL
HTB1sK0zXcTxK1Rjy0Fgq6yovpXa3.jpg__看图王.web_看图王
“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

we can produce seamless aluminum tube, aluminum bar, aluminum pipe, and industry aluminum profiles, alloy series from 1xxx to 7xxx, temper O H112 H24 T3 T4 T5 T6 T8 T651 Etc.

Aluminum extrusion equipment including 3600 tons and 2800 tons extruding machine, 1350 tons 1300 tons and 880 tons double-acting extruding machine, 800 tons reverse extruding machine, 630 tons 500 tons extruding machine, tension straightening machine, 11 rollers straighter, tube drawing mill, rod drawing machine, 400 KW vertical quench furnace , Ancillary equipment including nitriding furnace, homogeneous furnace, and ageing oven, eight set of intermediate frequency induction furnace and oxidation ponds.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”
ALUMINUM BAR
HTB1MxtAXojrK1RkHFNRq6ySvpXaV_看图王


  • Previous:
  • Next:

  • Related Products