Super Lowest Price Black Anodized Aluminum Sheet - stucco embossed aluminium sheet 5005 H34 – Huifeng

Patterned aluminum sheet is a high-cost modern material, there are many types, and it is widely used in furniture. Patterned aluminum plates are widely used in furniture: refrigerators, air conditioners, carriages, platforms, packaging pipes, screen frames, various suspension beams, table legs, decorative strips, handles, wire grooves and covers, chair tubes, etc.

Aluminum sheet alloy

1. Ordinary aluminum alloy pattern plate: the aluminum alloy pattern plate is processed by using 1060 aluminum plate as the base, which can adapt to the normal environment and is low in price. Usually cold storage, floor, and outer packaging use this kind of patterned aluminum sheet.

2. Aluminum alloy pattern plate: It is processed with 3003 as the main raw material. This kind of aluminum plate is also called anti-rust aluminum plate. Its strength is slightly higher than that of ordinary aluminum alloy pattern plate. It has certain anti-rust performance, but hardness and corrosion resistance. It cannot reach the 5000 series of patterned plates, so the product is used in non-strict anti-rust aspects, such as truck models and cold storage floors.

3. Aluminum-magnesium alloy pattern plate: It is processed from 5000 series aluminum plates such as 5052 or 5083 as raw materials, and has good corrosion resistance, hardness and rust resistance. Usually used in special places, such as ships, cabin lights, and humid environments. This kind of aluminum plate has high hardness and a certain load-bearing capacity.

Aluminum plate pattern

1. Five-reinforced aluminum alloy pattern plate: The five-reinforced non-slip aluminum plate has become a willow-shaped checkered plate and aluminum alloy checkered plate. It has good anti-skid ability and is widely used in construction (floor) platform design and other aspects. Because the pattern on the surface of the aluminum plate is arranged in parallel according to five concave and convex patterns, and each pattern presents an angle of 60-80 degrees with other patterns, this pattern has excellent anti-slip performance. This kind of aluminum plate is usually used as anti-skid in China, which has a good anti-skid effect, and the price is cheaper.

2. Compass aluminum alloy pattern plate: non-slip aluminum plate, which has the same effect as the five ribs, but is not often used.

3. Orange peel aluminum alloy pattern plate is divided into: classic orange peel pattern aluminum plate, variant orange peel pattern aluminum plate (also known as insect pattern). Its surface presents a pattern similar to orange peel, so it can also be called orange peel pattern aluminum plate. It is a series of products commonly used in refrigerators, air conditioners and packaging.

4. Lentil-shaped patterned aluminum sheet is a commonly used style of non-slip aluminum sheet. It has a good anti-skid effect. It is mainly used for skid prevention of carriages, platforms, cold storage floors, workshop floors, and elevators.

5. The spherical pattern aluminum sheet can also be called the semicircular spherical pattern aluminum sheet. The surface presents a small spherical pattern, just like small pearls, so this aluminum sheet can become a pearl-shaped pattern aluminum sheet. Mainly used in outer packaging. The appearance is more beautiful. Due to the special pattern, the strength of this aluminum plate is much higher than other pattern series.

6. Other aluminum pattern materials: wave-shaped pattern material, water-corrugated aluminum pattern sheet, corrugated pattern aluminum sheet (which can also become aluminum tile), rattan pattern aluminum sheet, three-dimensional triangle aluminum pattern sheet, strip pattern aluminum sheet, cobblestone aluminum Pattern sheet, pattern aluminum sheet, triangle strip pattern aluminum sheet, butterfly pattern aluminum sheet, etc.

7. Diamond-shaped aluminum alloy pattern plate: commonly used for packaging pipes or outer packaging.

“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

The aluminum coil equipment including 1850 mm hot rolling mill , three sets of 1850 mm & two sets of 1450mm cold rolling mill, flying shear machine six sets, bending straightening six sets, a 660 precision saw cutting machine , 260 meters roller coating production line.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”

“Jinan Huifeng aluminium Co., LTD”,provide full range services of aluminum tube including: extrusion, anodizing, machining and PVDF painting .have a wide range of commercial alloys, 2A12, 2014, 2014A, 2017A, 2024, 3003, 5A02, 5083, 6005A, 6060, 6061, 6063, 6082, 6463, 7020, 7075 etc .Temper H111 O T3 T351 T42 T5 T6 T651

Aluminum tube is a kind of non-ferrous metal tube, which refers to a metal tubular material that is made of pure aluminum or aluminum alloy by extrusion processing to be hollow along its full length in the longitudinal direction.

It is widely used in industries such as automobiles, ships, aerospace, aviation, electrical appliances, agriculture, electromechanical and household appliances.

Classification of aluminum tube/pipe

Aluminum tubes are mainly divided into the following types:

Divided by shape: square tube, round tube, pattern tube, special-shaped tube, global aluminum tube.

According to the extrusion method: seamless aluminum tube and ordinary extruded tube

According to the precision: ordinary aluminum tubes and precision aluminum tubes, of which precision aluminum tubes generally need to be reprocessed after extrusion, such as cold drawing, fine drawing, and rolling.

According to thickness: ordinary aluminum tube and thin-walled aluminum tube

Performance: corrosion resistance, light weight.

Aluminum tube advantages: First, welding technology advantages: the welding technology of thin-walled copper-aluminum tubes suitable for industrialized production is known as a world-class problem and is a key technology for replacing copper with aluminum for connecting pipes for air conditioners.

The second is the service life advantage: from the perspective of the inner wall of the aluminum tube, since the refrigerant does not contain moisture, the inner wall of the copper-aluminum connecting tube will not corrode.

The third is the energy-saving advantage: the lower the heat transfer efficiency of the connecting pipe between the indoor unit and the outdoor unit of the air conditioner, the more energy-saving, or in other words, the better the heat insulation effect, the more energy-saving.

Fourth, excellent bending performance, easy to install and move

Surface treatment

Chemical treatment: oxidation, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer

Anodized Yucheng carved round tube

Anodized Yucheng carved round tube

Mechanical treatment: mechanical wire drawing, mechanical polishing, sandblasting

“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

we can produce seamless aluminum tube, aluminum bar, aluminum pipe, and industry aluminum profiles, alloy series from 1xxx to 7xxx, temper O H112 H24 T3 T4 T5 T6 T8 T651 Etc.

Aluminum extrusion equipment including 3600 tons and 2800 tons extruding machine, 1350 tons 1300 tons and 880 tons double-acting extruding machine, 800 tons reverse extruding machine, 630 tons 500 tons extruding machine, tension straightening machine, 11 rollers straighter, tube drawing mill, rod drawing machine, 400 KW vertical quench furnace , Ancillary equipment including nitriding furnace, homogeneous furnace, and ageing oven, eight set of intermediate frequency induction furnace and oxidation ponds.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”

Aluminum tube is a kind of non-ferrous metal tube, which refers to a metal tubular material that is made of pure aluminum or aluminum alloy by extrusion processing to be hollow along its full length in the longitudinal direction.

It is widely used in industries such as automobiles, ships, aerospace, aviation, electrical appliances, agriculture, electromechanical and household appliances.

Classification of aluminum tube/pipe

Aluminum tubes are mainly divided into the following types:

Divided by shape: square tube, round tube, pattern tube, special-shaped tube, global aluminum tube.

According to the extrusion method: seamless aluminum tube and ordinary extruded tube

According to the precision: ordinary aluminum tubes and precision aluminum tubes, of which precision aluminum tubes generally need to be reprocessed after extrusion, such as cold drawing, fine drawing, and rolling.

According to thickness: ordinary aluminum tube and thin-walled aluminum tube

Performance: corrosion resistance, light weight.

Aluminum tube advantages: First, welding technology advantages: the welding technology of thin-walled copper-aluminum tubes suitable for industrialized production is known as a world-class problem and is a key technology for replacing copper with aluminum for connecting pipes for air conditioners.

The second is the service life advantage: from the perspective of the inner wall of the aluminum tube, since the refrigerant does not contain moisture, the inner wall of the copper-aluminum connecting tube will not corrode.

The third is the energy-saving advantage: the lower the heat transfer efficiency of the connecting pipe between the indoor unit and the outdoor unit of the air conditioner, the more energy-saving, or in other words, the better the heat insulation effect, the more energy-saving.

Fourth, excellent bending performance, easy to install and move

Surface treatment

Chemical treatment: oxidation, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer

Anodized Yucheng carved round tube

Anodized Yucheng carved round tube

Mechanical treatment: mechanical wire drawing, mechanical polishing, sandblasting

“Jinan Huifeng aluminium Co., LTD” restructured from state-run enterprise , located in China’s “rose town “—PingYing county of Jinan city, covers an area of more than 600 acres,it has 3 production factory and a joint venture factory.

we can produce seamless aluminum tube, aluminum bar, aluminum pipe, and industry aluminum profiles, alloy series from 1xxx to 7xxx, temper O H112 H24 T3 T4 T5 T6 T8 T651 Etc.

Aluminum extrusion equipment including 3600 tons and 2800 tons extruding machine, 1350 tons 1300 tons and 880 tons double-acting extruding machine, 800 tons reverse extruding machine, 630 tons 500 tons extruding machine, tension straightening machine, 11 rollers straighter, tube drawing mill, rod drawing machine, 400 KW vertical quench furnace , Ancillary equipment including nitriding furnace, homogeneous furnace, and ageing oven, eight set of intermediate frequency induction furnace and oxidation ponds.

We have passed the ISO9001, 2000 quality system authentication, and set up the professional testing laboratory, equipped with a spectrum analyzer, CNC tensile tester, high magnification microscopy, hardness tester, etc, with our qualified technical personnel together, to ensure the product quality completely meet customer’s requirements.

Meeting buyer’s demands is always our objects. Integrated products range give us more advantages. Jinan Huifeng aluminium Co., Ltd will always insist on “provide best products satisfying customers, quick response and full service rewarding customers”